Microcement Countertops South Florida | Seamless | Monarch
Monarch Custom Finishes, microcement countertop installation, South Florida
Countertops · Miami to Palm Beach

A counter with
no seam in it.

Island, perimeter, waterfall edge and backsplash finished as one continuous surface. Any shape, any color, applied by hand over the substrate that is already there.

Veteran owned
ForCrete certified
Owner on every job
Or call and text (561) 288-2474
What it is

A surface, not a slab.

Stone and quartz arrive as slabs, which means they arrive with edges, and every edge becomes a seam. Microcement arrives in a bucket and is applied in place, so the counter has exactly as many seams as you decide to put in it, which is none.

That single fact changes what is buildable. A waterfall edge runs down the side of an island as the same unbroken surface, with no mitered joint at the corner catching light differently. A backsplash continues up the wall from the counter with no transition line. A sink can be integrated so the basin, the deck and the splash read as one piece.

It goes over what is there. An existing laminate, tile, stone or plywood counter in sound condition is a substrate, which means a kitchen can be refinished without pulling cabinets, disconnecting plumbing or waiting on a slab template.

Color is matched rather than selected from a rack. The finish carries real movement because it is troweled by hand, so no two counters are identical, and the variation is the point rather than a defect.

The honest comparison

Where it beats stone, and where it does not.

01

No seams, at any length.

A twelve foot island is one surface. Quartz at that length needs a joint, and the joint is the first thing your eye finds every time you walk into the room.

02

Shapes stone cannot do.

Curved islands, rounded corners, waterfall returns, integrated basins and splashes. Anything that would need cutting and joining in slab is simply applied here.

03

Heat is the real limit.

Set a hot pan down on it and you can mark the sealer. Use a trivet. Granite tolerates that abuse better and we are not going to tell you otherwise.

04

Acid wants wiping up.

Lemon juice, vinegar and wine will not hurt it if you wipe them within a reasonable time. Left to sit overnight they can dull the sealer in that spot.

If you want a surface you can treat carelessly, buy granite. If you want a kitchen with no seam in it, in a color nobody else has, this is the one that does that.

Where it goes

Kitchens, baths and everything outside.

Counters are rarely the whole job. Most of these get specified alongside a floor or a backsplash in the same finish.

Kitchen islands

The most common one, and where the no-seam argument is most obvious. Waterfall edges included.

Perimeter counters

Run continuously around corners and into the backsplash with no transition line anywhere along the way.

Backsplashes as one surface

The counter turns up the wall and keeps going. No joint, no trim piece, no silicone bead to discolor.

Bathroom vanities

Floating vanities built on site with an integrated basin, finished in the same material as the shower.

Outdoor kitchens and bars

A common South Florida job. Specified with an exterior-rated sealer for sun and salt air.

Range hoods and hearths

Formed and finished as one monolithic piece. Standalone specialty work like this carries a $2,500 minimum.

Anything that gets wet every day, like a shower pan, is a different specification. Counters are not that.

The same system, on a floor

Drag to watch the tile disappear.

Counters are usually specified alongside the floor. This is the floor half, applied directly over the existing tile.

Before · Existing tile
Before image digitally reconstructed
After · Microcement

Drag the handle, or use the left and right arrow keys.

Before you read any further

Want the number for your kitchen?

The calculator asks for square footage and which surfaces you are doing, then emails you a real range in about a minute. You get it in writing without talking to anyone first.

Or call and text (561) 288-2474
Selected work

Every photograph below is a Monarch installation.

No stock imagery, no renders, no borrowed portfolio. These are South Florida homes Michael finished himself.

Outdoor kitchen and bar finished in microcement
Outdoor kitchen and bar
Floating vanity built on site and finished in microcement
Floating vanity, built on site
Walls, ceiling and floor finished in one continuous surface
Walls, ceiling and floor in one finish
Hand sanding a microcement surface between coats
Worked by hand between coats
Michael Daniels, founder of Monarch Custom Finishes
Founded by a craftsman

The man who teaches this system
leads your project.

Monarch was founded by Michael Daniels, a U.S. Marine Corps veteran and one of the first certified ForCrete installers in the country. He trains new applicators for ForCrete Americas, and he leads every Monarch project personally alongside a crew he trained himself.

Counters are the surface people touch every day and look at from six inches away, which is a harder test than a floor. Edges, returns and the transition into a basin are where hand skill shows. He lives in Deerfield Beach and works from Miami up through Palm Beach, and when you call, you talk to him.

Book a free consultation
The part everyone asks second

What it costs.

Counters are quoted on total surface area like everything else, which on a counter means the top, the edges, any waterfall return and the backsplash if it is continuing up the wall. A waterfall island carries noticeably more area than its footprint suggests.

A counter on its own is usually a small enough scope that it makes more sense alongside a floor or a backsplash in the same visit. Standalone specialty pieces such as a range hood or a fireplace hearth carry a $2,500 minimum.

There is a calculator on the home page that gives you a real range in about a minute, and it emails you the breakdown so you have it in writing. It is a range, honestly labeled as one. The firm number comes after somebody stands in the room.

$18 to $24

Per square foot of total surface area, counting the top, the edges and any waterfall return.

$2,500 minimum

On standalone specialty pieces only, such as a range hood or a hearth quoted on its own.

60 / 40

The deposit reserves your dates. The balance is due once the finish coats are complete.

Common questions

Before you book.

Can I put a hot pan straight on it?

Use a trivet. The sealer can mark under direct heat from a pan straight off the burner. This is the one place granite genuinely outperforms it, and we would rather say so now than have you find out in month two.

Will lemon juice or wine stain it?

Not if it is wiped up within a reasonable time, which covers normal cooking. Acids left sitting overnight can dull the sealer in that spot. The repair is local rather than a replacement, because the surface is refinishable in place.

Can I cut directly on it?

Use a board. A knife will score the sealer the same way it would score most finishes that are not stone. A scored area can be reworked and resealed in place, but a board is easier.

Can it go over my existing countertops?

Usually, yes. Laminate, tile, stone and sound plywood all work as a substrate, which means no pulling cabinets and no disconnecting plumbing. We confirm the condition at the site visit before anything is scheduled.

How does it compare to quartz or poured concrete?

Quartz is harder and more forgiving of heat, and it comes with seams on any long run. Poured concrete is heavy, cures with hairline cracking and has to be fabricated or formed. Microcement is applied in place at a few millimeters, takes any shape, has no seams, and is the one of the three you can put over your existing counter.

What does it cost?

Counters are quoted on total surface area, typically $18 to $24 per square foot, counting the top, the edges and any waterfall return. Standalone specialty pieces such as a range hood carry a $2,500 minimum. You get exact numbers after a short consultation.

Countertops

Still deciding?

Answer a few questions about the kitchen, then pick a time. Thirty minutes on the phone with Michael, who gives you real numbers rather than a guess.

Or call and text (561) 288-2474
Where we work

Miami up through Palm Beach.

Michael is based in Deerfield Beach and runs every project personally. Pick your city for the neighborhoods we cover and the work we have done there.

Not on the list? Ask. If it is between Miami and Stuart the answer is almost always yes.

We also do Venetian plaster, microcement over tile, showers and bathrooms and floors.

Veteran
Owned
ForCrete
Certified
Miami to
Palm Beach
Owner on
Every Job
Countertops

Start with a few questions.

Tell us about the kitchen and pick a time. Thirty minutes on the phone with Michael, who will ask what the counters are now and give you a realistic range on the call. Nothing is booked until he has seen them in person, and that visit costs nothing either.

Tell us about your space Get a ballpark first

Or call and text (561) 288-2474

Monarch Custom Finishes Inc. · Deerfield Beach, Florida 33441
(561) 288-2474  ·  [email protected]  ·  Terms  ·  Privacy