Venetian & Polished Plaster South Florida | Monarch
Monarch Custom Finishes, Venetian plaster, South Florida
Venetian plaster · Miami to Palm Beach

Paint sits on a wall.
Plaster sits in it.

Slaked lime and finely ground marble, pressed into the surface in thin coats and burnished by hand. The depth you are looking at is real depth, and it changes as the light in the room changes.

Veteran owned
ForCrete certified
Owner on every job
Or call and text (561) 288-2474
What it actually is

Lime, marble dust and a trowel.

Venetian plaster is a lime finish, not a paint and not a coating. Slaked lime putty carries finely ground marble, and the two go on in coats thinner than a sheet of paper, each one troweled tight and then burnished.

The sheen is not a topcoat. It comes from compressing the surface until the marble in it starts to reflect, which is why a polished plaster wall has that quiet shift in it when you walk past and a painted wall does not. The color is in the material rather than on top of it, so a knock does not expose a different color underneath.

It is also breathable. Lime moves water vapor through itself instead of trapping it behind a film, which matters more in a South Florida house than most people realize.

Depending on how many coats go on and how hard the last one is worked, the same family of material finishes anywhere from a near-marble polish to a flat, matte, stone-like surface. Grassello is the fine, high-polish version, the one people picture when they hear Venetian plaster. Marmorino carries a coarser aggregate and reads more like honed stone. Alongside those we do custom decorative work, including metallic and heavily textured finishes, built to a sample board you approve before anything goes on the wall.

Which one belongs in your room is a decision made with you, in your light, holding the sample. Not picked off a chart.

The question everybody asks first

Venetian plaster, or microcement?

They get used interchangeably and they should not be. They are different materials for different jobs, and picking the wrong one is the most common mistake we get called in to correct.

Venetian plaster

Walls and ceilings
Where it goes
Feature walls, barrel ceilings, arches, radiused walls, columns, niches, stairwells, fireplace surrounds. Dry areas.
How thick
Well under a millimeter, built up over several coats.
What it looks like
Depth and movement. Grassello polishes to near marble, Marmorino reads like honed stone.
Wet areas
Not the right tool for a shower pan, a shower floor or anything standing in water.
Why you choose it
Because you want the wall itself to have something in it.

Microcement

Floors and wet areas
Where it goes
Floors, shower walls, curbless pans, countertops, stairs. Anywhere that gets wet or walked on.
How thick
A few millimeters, bonded over tile, concrete or drywall.
What it looks like
Quieter and more even. Closer to honed concrete than to stone.
Wet areas
Fully waterproof once the primer and layers are in. Showers are our most common job.
Why you choose it
Because the surface has to perform as well as look right.

Most Monarch projects use both. Plaster above, microcement below, specified together so the tones actually agree, applied by the same hand on the same visit. You are not scheduling a plasterer and then a flooring contractor and hoping the grays match.

Where it earns its keep

The surfaces tile and paint both get wrong.

Plaster goes on flat drywall perfectly well, and on a flat wall it is a luxury. On everything below it is closer to the only honest answer.

Feature walls

A dining wall, a headboard wall, the wall behind the bar. One surface with real depth in it, no wallpaper seam and no repeat.

Barrel ceilings and vaults

Hand-applied material follows a curve. It goes up a barrel ceiling as one unbroken surface because there is nothing to join.

Arches and radiused walls

Tile has to be cut into a curve and grouted every few inches. Plaster simply follows the radius the architect drew.

Columns and niches

Round columns, recessed niches, reveals and returns. Every inside and outside corner finishes in the same material.

Stairwells and double-height entries

The surface most visible in the house and the hardest to make interesting with paint. Plaster reads differently at every floor.

Fireplace surrounds and range hoods

A monolithic hearth or hood, formed and finished as one piece. Standalone specialty work like this carries a $2,500 minimum.

Where it does not go: shower floors, curbless pans and anything that sits in standing water get microcement instead. Exterior walls are a different specification. And if you have original plaster in an older house that needs patching or historic plaster repair, that is restoration work and a different trade. What we do is a new hand-applied finish over a sound substrate, which is a different job with a different warranty.

Why here, specifically

The houses here were drawn for it.

Mediterranean Revival, Spanish Colonial, the whole Mizner vocabulary that Palm Beach and Boca Raton were built on. Arched openings, barrel-vaulted loggias, thick walls, deep reveals. That architecture was designed around a lime plaster finish, and the reason so many of those rooms feel flat today is that somewhere along the way the plaster got replaced with paint.

There is a practical side too. A painted wall is a film sitting on the substrate, and in a climate that runs humid eleven months a year, moisture that gets behind a film has nowhere to go. Lime does not behave that way. It passes vapor through itself, and it is naturally alkaline, which is unfriendly to the things that like to grow on a wall in a coastal house.

And the installer matters as much as the material. Michael Daniels is a certified ForCrete installer, one of the first in the United States, and he trains new applicators for ForCrete Americas. Hand-applied finishes are not a product you buy, they are a product somebody applies. On your job he is the one holding the trowel.

The floor half of the same job

Drag to watch the tile disappear.

Plaster goes on the walls, microcement goes on the floors, and most plaster projects include both. This is the floor side, applied directly over the existing tile. No demolition, no new plumbing, nothing torn out.

Before · Existing tile
Before image digitally reconstructed
After · Microcement

Drag the handle, or use the left and right arrow keys.

Before you read any further

Want to see it in your light?

Tell us about the wall and pick a time. Thirty minutes on the phone with Michael, who asks what the room is doing and tells you honestly whether plaster is the right call for it.

Or call and text (561) 288-2474
Selected work

Every photograph below is a Monarch installation.

No stock imagery, no renders, no borrowed portfolio. These are South Florida homes Michael finished himself.

Walls, ceiling and floor finished in one continuous hand-applied surface
Walls, ceiling and floor in one finish
Recessed wall niche formed and finished by hand with no joints
Recessed niche, formed and finished
Hand sanding a plaster surface between coats
Worked by hand between coats
Living space with seamless hand-applied finish running to the glass
Living space, finish to the glass
Michael Daniels, founder of Monarch Custom Finishes
Founded by a craftsman

The man who teaches this system
leads your project.

Monarch was founded by Michael Daniels, a U.S. Marine Corps veteran and one of the first certified ForCrete installers in the country. He trains new applicators for ForCrete Americas, and he leads every Monarch project personally alongside a crew he trained himself.

Hand-applied plaster is a skill, not a SKU. Two installers using the same bucket produce two different walls. He lives in Deerfield Beach and works from Miami up through Palm Beach, and when you call about your project, you talk to him.

Book a free consultation
The part everyone asks second

What it costs.

We do not publish a square-foot number for plaster, and the reason is honest rather than coy. On a plaster wall the price is driven less by area than by how many coats the finish needs and how hard the last one is worked. A matte two-coat wall and a high-polish wall of the same size are not the same job, and the surface underneath changes it again.

What we can tell you before anyone visits is the range for the microcement side of the work, which is usually the larger number. The calculator on the home page gives you a real range in about a minute and emails you the breakdown so you have it in writing. The plaster scope gets quoted on the call, once Michael knows what the wall is and what you want it to do.

No hidden materials line

Preparation, primer, base coats, finish coats, burnishing and labor are all in the figure.

60 / 40

The deposit reserves your dates. The balance is due once the finish coats are complete.

$2,500 minimum

On standalone specialty pieces only, such as a range hood or a fireplace hearth on its own.

Common questions

Before you book.

Is Venetian plaster the same thing as microcement?

No, and the difference matters. Venetian plaster is a lime finish for walls and ceilings, built up in coats thinner than paper and burnished to a sheen. Microcement is a few millimeters thick, waterproof, and made for floors, shower walls and countertops. We install both, and on most projects we use both: plaster above, microcement below, specified so the tones agree.

What does Venetian plaster cost?

Plaster is quoted per project rather than off a published rate, because the number of coats and the level of polish move the price more than square footage does. For the microcement side of a project, floor, wall and ceiling installations typically run $18 to $24 per square foot of total surface area, and bathrooms begin around $6,000. You get exact numbers for both after a short consultation.

Can it go over painted drywall, or does the paint have to come off?

In most cases the paint stays. The wall gets cleaned, any damage gets made good, and a primer goes on that gives the plaster something to grip. What we do need is a sound, dry, stable surface. Peeling paint, soft drywall or an active moisture problem gets fixed first, and that is exactly what gets checked before a number is written down.

Will it crack?

Lime plaster is flexible and it is applied in very thin coats, so it is far less prone to cracking than a thick cementitious coat. What it will not do is bridge a moving substrate. If the wall behind it cracks, a finish a fraction of a millimeter thick is not going to hold it together, which is why the substrate gets inspected rather than assumed.

Can it go in a bathroom?

On the walls and ceiling of a bathroom, yes, including a powder room, a vanity wall or above a tub. Inside the shower itself, and on any floor or pan, we use microcement instead, because that is the material that is actually waterproof. A single bathroom often ends up with both.

How do I clean it, and how does it hold up?

A soft cloth and water. No abrasives, no bleach, nothing acidic, because lime reacts to acid. Sealed plaster shrugs off fingerprints and wipes clean. It ages the way stone ages rather than the way paint ages, and because the color runs through the material a scuff does not reveal a different color underneath. If a wall ever does get damaged, it is patched and reburnished in place rather than repainted wall to wall.

Venetian plaster · South Florida

Still deciding?

Answer a few questions about the room, then pick a time. Thirty minutes on the phone with Michael, who gives you real numbers rather than a guess. If it looks like a fit, he comes out and sees the wall in person before anything is booked.

Or call and text (561) 288-2474
Where we work

Miami up through Palm Beach.

Michael is based in Deerfield Beach and runs every project personally. Pick your city for the neighborhoods we cover and the work we have done there.

Not on the list? Ask. If it is between Miami and Stuart the answer is almost always yes.

We also do microcement over tile, showers and bathrooms, countertops and floors.

Veteran
Owned
ForCrete
Certified
Miami to
Palm Beach
Owner on
Every Job
Venetian plaster

Start with a few questions.

Tell us about the room and pick a time. Thirty minutes on the phone with Michael, who will ask what the wall is and give you a realistic range on the call. Nothing is booked until he has seen the surface in person, and that visit costs nothing either.

Tell us about your space Get a ballpark first

Or call and text (561) 288-2474

Monarch Custom Finishes Inc. · Deerfield Beach, Florida 33441
(561) 288-2474  ·  [email protected]  ·  Terms  ·  Privacy